• tobogganablaze@lemmus.org
    link
    fedilink
    English
    arrow-up
    1
    ·
    2 months ago

    You won’t find these symbols on most devices though (certainly not on any macbook as the picture suggests).

  • Aceticon@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    2 months ago

    A small correction on USB PD…

    It’s not just USB PD that supports power delivery: Standard USB from way back in 1.0 also supports power delivery to devices as standard, but it’s only up to 100mA in USB 1.0, 500mA in USB 2.0 and 900mA in USB 3.0, all at 5V.

    USB PD is a dedicated power delivery USB protocol that supports much higher currents (up to 5A) as well as dynamically configured voltages (so, not fixed as 5V anymore) though it’s all negotiated so your 5V-only phones isn’t going to just get burned with 20V from a USB PD charger.

    Since Power = Current * Voltage USB PD can put out quite a lot of power for supporting devices (the maximum depending on what both sides support), which means much faster transmission of power via USB which for example means faster charging of chargeable devices via USB with USB PD.

    Anyways, the point being that even really old USB 1.0 can charge your device (just really really slow, though you’ll be hard pressed to find anything that doesn’t support at least USB 2.0 which can send 5x the current of 1.0 hence charge 5x faster than it), and that standard charging speed goes up with each new Standard USB generation since each has a higher maximum current than the previous one, so for example a standard USB 3.1 charger without USB PD support can still push a nice amount of power down the line to charge devices. It’s just that with USB PD things really take off (though only up to a shared maximum that both sides support) and it can push enough power to support larger devices such as full-blown monitors or even charging notebooks.

  • NotAnonymousAtAll@feddit.org
    link
    fedilink
    English
    arrow-up
    0
    ·
    2 months ago

    TL;DR: The USB Implementers Forum is ridiculously bad at naming, symbols and communication in general. (And they don’t seriously enforce any of this anyway, so don’t even bother learning it.)

    • thatKamGuy@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 months ago

      This is the correct answer; after the whole USB 3.2 Gen 2 2x2 (hands of blue) bullshit, I wouldn’t trust that team to name a park bench in the middle of the desert. Let alone something important and universally used.

      • quant@leminal.space
        link
        fedilink
        English
        arrow-up
        1
        ·
        2 months ago

        We could have gone for already proven and tested conventions like the resistor color codes and have a unique distinguishable icon for each features to attach when needed (like thunder icon for high power). But nope, we got this USB 3.2 Gen 4 2x2 Hyper Turbocharged World Champions and Knuckles Platinum Edition bs instead.